Reset your Holosun EPS Carry Red Dot Sight

Occasionally, you may need to reinitialize your Holosun EPS Carry Red Dot sight to its factory settings. This can be helpful if you've been tinkering with the adjustments or are experiencing unexpected behavior. Fortunately, resetting your Holosun is a straightforward process that can be completed in just a few procedures.

Begin by ensuring your red dot sight is turned on.
Locate the small reinitialize button on the side of the sight.
Utilize a thin tool to activate the reset switch for approximately three seconds.
Release the lever and your Holosun EPS Carry Red Dot sight will restart.
Its red dot sight should now be reverted to its factory settings.

Return to Your Holosun EPS Carry Red Dot toward Defaults

In case you've tweaked your Holosun EPS Carry red dot settings and want to start fresh, resetting it to its factory configuration is a breeze. First, determine the tiny button on the rear of your optic. Then, sustain it for around twelve seconds until you see the indicator light change. Your Holosun EPS Carry is now reverted to its factory settings, ready for accurate shooting.

revive your Holosun EPS Carry Back to : Functionality

Is your beloved Holosun EPS Carry experiencing some glitches? Don't despair! A simple factory reset can often resolve the problem and get your red dot sight back to its former glory. Before you begin, remember to detach the battery from your Holosun EPS Carry to prevent accidental activation during the process.

To perform a factory reset on your Holosun EPS Carry, follow these simple steps:

Press and hold the power button for approximately 5 seconds.
The display will flash, indicating that the reset is successfuly initiated.
Let go of the power button once the reset is complete.

Your Holosun EPS Carry should now be back to its factory settings. You can connect the battery and test your sight's functionality. If you encounter any further difficulties, don't hesitate to seek help from Holosun's support.

Return Factory Settings on Your Holosun EPS Carry: A Step-by-Step Guide

Resetting your Holosun EPS Carry to factory settings can be a helpful solution if you're experiencing issues with the optic or simply want to start fresh. This process erases all user configurations and returns the sight to its original state. Before proceeding, remember to note down any customizations you have made as they will be lost during this process. Follow these steps carefully to ensure a successful factory reset.

Initially, Activate your Holosun EPS Carry by pressing the power button.
After that, press and hold both the mode button and the up/down adjustment button simultaneously.
As you continue holding these buttons, tap the power button once.
You will show a confirmation prompt indicating that the reset process is initiated.
Permit the process to complete. This may take a few moments. Once done, your Holosun EPS Carry will automatically power off.

After resetting your Holosun EPS Carry click here to factory settings, you will need to re-enter any desired customizations, such as brightness levels and reticule style. Refer to the user manual for detailed instructions on configuring your optic after a reset.

Erase All Settings on Your Holosun EPS Carry

To Factory reset your Holosun EPS Carry sight, you'll need to access the settings menu. This can usually be done by Holding a specific button combination. Consult your Instruction for the exact button sequence for your model. Once in the settings menu, look for an option that says "Clear Settings". Select this option and confirm the reset. Your sight will then power off and restart with all settings Returned to their default values.

Reinitialize your Holosun EPS Carry with a Factory Default Settings

If your Holosun EPS Carry is acting up, a factory reset might be the solution. This will set back your sight to its factory settings, clearing any custom configurations you've made. To accomplish this reset, follow these straightforward steps:

To begin, locate the reset button on your EPS Carry.
Then, use a thin object, like a pen tip, to depress the reset button.
During hold the reset lever pressed, activate your EPS Carry.
The sight will display a message indicating that the reset is successful.

Once the reset is finished, your EPS Carry will be set to its factory settings.